skip to main text

Firmware update

Select this menu from Device settings in Setup menu.

You can update the firmware of the printer, check the firmware version, or perform settings of a notification screen, a DNS server and a proxy server.

Important

  • The administrator password may be required to change the settings.

  • When you use this function, make sure the printer is connected to the internet.

  • Install update

    Performs the firmware update of the printer. Follow the on-screen instructions to perform update.

  • Current version

    You can check the current firmware version.

  • Update notification

    You can set the printer to display the firmware update information on the LCD when the firmware update is available.

    When Idle/Power off is selected, the printer informs you of the update during idle and the update information also appears when you press the ON button.

  • Auto update setting

    Select ON to automatically update the firmware to the latest version.

  • DNS server setup

    Performs settings for a DNS server. Select Auto setup or Manual setup. If you select Manual setup, follow the display on the LCD to perform settings.

  • Proxy server setup

    Performs settings for a proxy server. Select Use or Do not use. If you select Use, follow the display on the LCD to perform settings.